Triple Weber Carb for Sale

PastorJohn · 09-24-2004, 07:49 PM

I have a Weber Triple Carb 45 (I think) DCOE setup for a 280Z. It was purchased from a trusted mechanic who told me it was running well when removed from the vehicle. It has been lying on a shop shelf since. I have NOT had opportunity to disassemble and check it out. Financial considerations make fuel injection a preferred option for me.

Visual inspection as follows:
It is missing an individual carburetor connector and the triple connector bar. A nut is missing from bottom of one carburetor linkage. One manifold bolt hole is stripped. One resource for parts may be www.carburetion.com. I have 10 (ten) .jpg files I will email upon request. Each of the above is shown along with the good stuff. The pictures total 2.7 megabytes.

I would sell for $800 plus UPS shipping, and local pickup is possible.

Package would be (approx.) 26”W x 16”L x 9”H weighing 28 lbs from zip code 30458.

Payment could be cash, cashier’s check, or Paypal.

Thanks for your consideration.

bjhines · 10-11-2004, 08:58 PM

find out what the throat bore is. and email me....I will email you an offer.

PastorJohn · 10-14-2004, 01:51 PM

Quote:

Originally Posted by bjhines

find out what the throat bore is. and email me....I will email you an offer.

Will do no later than 10-18-04. Thanks for the response.

PastorJohn · 10-17-2004, 02:31 PM

Quote:

Originally Posted by bjhines

find out what the throat bore is. and email me....I will email you an offer.

Throat size is 1.750 inches. Attached are photos of the unit showing the missing linkages, the missing screw, and the stripped bolt.

My personal email is pastorjohnc@frontiernet.net

PastorJohn · 10-17-2004, 02:32 PM

Quote:

Originally Posted by bjhines

find out what the throat bore is. and email me....I will email you an offer.

Throat size is 1.750 inches. Attached are photos of the unit showing the missing linkages, the missing screw, and the stripped bolt.

My personal email is pastorjohnc@frontiernet.net

09-24-2004, 07:49 PM	#1
PastorJohn Registered User Join Date: Jun 2004 Location: Georgia Posts: 7	Triple Weber Carb for Sale I have a Weber Triple Carb 45 (I think) DCOE setup for a 280Z. It was purchased from a trusted mechanic who told me it was running well when removed from the vehicle. It has been lying on a shop shelf since. I have NOT had opportunity to disassemble and check it out. Financial considerations make fuel injection a preferred option for me. Visual inspection as follows: It is missing an individual carburetor connector and the triple connector bar. A nut is missing from bottom of one carburetor linkage. One manifold bolt hole is stripped. One resource for parts may be www.carburetion.com. I have 10 (ten) .jpg files I will email upon request. Each of the above is shown along with the good stuff. The pictures total 2.7 megabytes. I would sell for $800 plus UPS shipping, and local pickup is possible. Package would be (approx.) 26”W x 16”L x 9”H weighing 28 lbs from zip code 30458. Payment could be cash, cashier’s check, or Paypal. Thanks for your consideration. Last edited by PastorJohn; 09-24-2004 at 07:53 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-11-2004, 08:58 PM	#2
bjhines Registered User Join Date: Oct 2004 Location: Raleigh NC Posts: 106	find out what the throat bore is. and email me....I will email you an offer.