SBC powered 280zx parting out
06-23-2002 | 11:05 AM
#1
Guest
Posts: n/a
SBC powered 280zx parting out
i posted this on z-car and the Hybrid board as well. here goes:
project was approximately 80% complete. there are allmost too many parts to list. the motor is currently spoken for but make me an offer in case that it should fall through. here's the list and some links to pics.
94 LT1 engine, 40k on the clock and has a few goodies in it. bosh +4's. new wires, all accessories save AC, pullies and belt. ready to run. custom tuned PCM for the swap, custom wiring harness and hooker 1-5/8" street rod headers
GM 200-4r tranny w/ a larry's automotive custom Stall converter (2600-3000)and trans-go shift kit brand new tranny and has not been run.
the car is in good shape but it has no tranny mount so it will have to be fabricated if you want to go back to an L6. it has some rust in the usual places but for a south texas car, it's in prett good shape. wheels/tires are for sale as well so long as it has something to roll on. i do know a guy here local that has a turbo motored car for sale pretty cheap and it could easily be done for under 3k with my contacts. please e-mail for more details. this stuff must go!
Jags that run motor mounts, brand new griffin aluminum radiator, poly bushing kit, many new suspension parts, dash cap w/ LT1 speedo and electronics. all else should be in the pics. i'd love to sell this as a complete item and all offers will be considered as well as trades. i really hate to part this out but i simply cannot take on 2 projects at once. i would love to sell the car here local but i will ship the bigger stuff. im located in Corpus Christi, Tx e-mail me if you're serious about something. thanks guys!
Super280z @ hotmail.com
http://photos.yahoo.com/bc/vince0718.../LT1+Z&.view=t
~Vince
project was approximately 80% complete. there are allmost too many parts to list. the motor is currently spoken for but make me an offer in case that it should fall through. here's the list and some links to pics.
94 LT1 engine, 40k on the clock and has a few goodies in it. bosh +4's. new wires, all accessories save AC, pullies and belt. ready to run. custom tuned PCM for the swap, custom wiring harness and hooker 1-5/8" street rod headers
GM 200-4r tranny w/ a larry's automotive custom Stall converter (2600-3000)and trans-go shift kit brand new tranny and has not been run.
the car is in good shape but it has no tranny mount so it will have to be fabricated if you want to go back to an L6. it has some rust in the usual places but for a south texas car, it's in prett good shape. wheels/tires are for sale as well so long as it has something to roll on. i do know a guy here local that has a turbo motored car for sale pretty cheap and it could easily be done for under 3k with my contacts. please e-mail for more details. this stuff must go!
Jags that run motor mounts, brand new griffin aluminum radiator, poly bushing kit, many new suspension parts, dash cap w/ LT1 speedo and electronics. all else should be in the pics. i'd love to sell this as a complete item and all offers will be considered as well as trades. i really hate to part this out but i simply cannot take on 2 projects at once. i would love to sell the car here local but i will ship the bigger stuff. im located in Corpus Christi, Tx e-mail me if you're serious about something. thanks guys!
Super280z @ hotmail.com
http://photos.yahoo.com/bc/vince0718.../LT1+Z&.view=t
~Vince
07-14-2006 | 12:18 PM
#2
Registered User
Joined: Jul 2006
Posts: 2
Parts
Originally Posted by Super280z
i posted this on z-car and the Hybrid board as well. here goes:
project was approximately 80% complete. there are allmost too many parts to list. the motor is currently spoken for but make me an offer in case that it should fall through. here's the list and some links to pics.
94 LT1 engine, 40k on the clock and has a few goodies in it. bosh +4's. new wires, all accessories save AC, pullies and belt. ready to run. custom tuned PCM for the swap, custom wiring harness and hooker 1-5/8" street rod headers
GM 200-4r tranny w/ a larry's automotive custom Stall converter (2600-3000)and trans-go shift kit brand new tranny and has not been run.
the car is in good shape but it has no tranny mount so it will have to be fabricated if you want to go back to an L6. it has some rust in the usual places but for a south texas car, it's in prett good shape. wheels/tires are for sale as well so long as it has something to roll on. i do know a guy here local that has a turbo motored car for sale pretty cheap and it could easily be done for under 3k with my contacts. please e-mail for more details. this stuff must go!
Jags that run motor mounts, brand new griffin aluminum radiator, poly bushing kit, many new suspension parts, dash cap w/ LT1 speedo and electronics. all else should be in the pics. i'd love to sell this as a complete item and all offers will be considered as well as trades. i really hate to part this out but i simply cannot take on 2 projects at once. i would love to sell the car here local but i will ship the bigger stuff. im located in Corpus Christi, Tx e-mail me if you're serious about something. thanks guys!
Super280z @ hotmail.com
http://photos.yahoo.com/bc/vince0718.../LT1+Z&.view=t
~Vince
project was approximately 80% complete. there are allmost too many parts to list. the motor is currently spoken for but make me an offer in case that it should fall through. here's the list and some links to pics.
94 LT1 engine, 40k on the clock and has a few goodies in it. bosh +4's. new wires, all accessories save AC, pullies and belt. ready to run. custom tuned PCM for the swap, custom wiring harness and hooker 1-5/8" street rod headers
GM 200-4r tranny w/ a larry's automotive custom Stall converter (2600-3000)and trans-go shift kit brand new tranny and has not been run.
the car is in good shape but it has no tranny mount so it will have to be fabricated if you want to go back to an L6. it has some rust in the usual places but for a south texas car, it's in prett good shape. wheels/tires are for sale as well so long as it has something to roll on. i do know a guy here local that has a turbo motored car for sale pretty cheap and it could easily be done for under 3k with my contacts. please e-mail for more details. this stuff must go!
Jags that run motor mounts, brand new griffin aluminum radiator, poly bushing kit, many new suspension parts, dash cap w/ LT1 speedo and electronics. all else should be in the pics. i'd love to sell this as a complete item and all offers will be considered as well as trades. i really hate to part this out but i simply cannot take on 2 projects at once. i would love to sell the car here local but i will ship the bigger stuff. im located in Corpus Christi, Tx e-mail me if you're serious about something. thanks guys!
Super280z @ hotmail.com
http://photos.yahoo.com/bc/vince0718.../LT1+Z&.view=t
~Vince
How much for the transmission and radiator?
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
