1983 280zx no start
08-06-2013 | 02:59 PM
#1
Thread Starter
Registered User
Joined: Aug 2013
Posts: 1
1983 280zx no start
i have a 1983 280zx that will start and stall have replaced the ecu and fuel pump still will not run i can unplug 2 injectors and the car will stay running i think its a ground problem any help out there thanks
08-06-2013 | 04:59 PM
#2
The Good Twin
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Welcome to ZDriver!
If you unplug injectors, it gets less fuel. So if it runs that way, I'd say it's flooding. The usual culprit is a disconnected / corroded CHTS (cylinder head temp sensor) or AFM. Check them.
If you unplug injectors, it gets less fuel. So if it runs that way, I'd say it's flooding. The usual culprit is a disconnected / corroded CHTS (cylinder head temp sensor) or AFM. Check them.
Thread
Thread Starter
Forum
Replies
Last Post
ColeParker
280ZX (S130) Forums
20
10-09-2014 12:56 PM
moorebl
280ZX (S130) Forums
2
04-14-2011 04:28 PM
Bookmarks
