280ZX 3 inch exhaust systems
#1
280ZX 3 inch exhaust systems
CM Performance Exhaust now has 3 inch mandrel bent exhaust systems available. We have been building exhaust systems for Z31's for over ten years. For information and pictures go to our website www.cmperformanceexhaust.com.
#2
Pictures
Just visited your site, the pictures on your website are a bit small, almost thumbnail size, hard to make out any details, might be a good idea to have some high resolution pictures of your work, better advertising
Us ZX guys do appreciate all of the aftermarket companies that are showing up to support our cars. Ill post your link on our ZX drivers facebook page.
here is a link https://www.facebook.com/groups/164690436882353/
Us ZX guys do appreciate all of the aftermarket companies that are showing up to support our cars. Ill post your link on our ZX drivers facebook page.
here is a link https://www.facebook.com/groups/164690436882353/
#3
Thanks
Thanks for the input. All of the pictures are 650 Pixels by 450. If you click on the pictures in the 280ZX section you go zoom in on the picture. We will try to make the pictures bigger and see what they look like. There are pictures of the exhaust system installed on a 280ZX in the photo gallery. Those pictures are the 650 X 450 too. Those pictures enlarge instead of zooming.
We have been working on building the website so any input would be appreciated.
Dave
We have been working on building the website so any input would be appreciated.
Dave
#4
all models
When I posted your link on our Facebook page I got a comment back that Ill quote
Will Hayward "My worry is the couple I clicked on, don't talk about compatible years models. There's going to be differences between NA and turbo, and series one and series two, and coupe and 2+2."
Didn't try clicking on all the links myself, but since there is some variations in our cars I am assuming you guys have that info, to help, we might be able to get a few owners in your area to volunteer there cars for engineering measurements, and possible modifications needed to cover the various models.
Thanks again
Will Hayward "My worry is the couple I clicked on, don't talk about compatible years models. There's going to be differences between NA and turbo, and series one and series two, and coupe and 2+2."
Didn't try clicking on all the links myself, but since there is some variations in our cars I am assuming you guys have that info, to help, we might be able to get a few owners in your area to volunteer there cars for engineering measurements, and possible modifications needed to cover the various models.
Thanks again
#5
I think you were looking under the 300ZX 84-89 models. The category for the 280ZX was at the bottom of the list. I moved it to underneath the 300ZX. Tell the person to look again. Let them know also that they can look in the photo gallery for installed pictures on the 280ZX turbo.
#7
s130
The 280zx or s130 model was from 1979 to 1983, 81 was the 1st year for a turbo car, each year after that you could get an NA or turbo, there are also 2+2 versions of each that are longer cars. Here is a little Wiki history on the model, http://en.wikipedia.org/wiki/Nissan_S130
Thread
Thread Starter
Forum
Replies
Last Post
Rrassi300zx
300ZX (Z32) Brakes, Wheels, Suspension and Chassis
2
02-12-2013 09:29 PM
BatmobileZ
300ZX (Z32) Performance / Technical
3
01-11-2002 12:04 PM
Bookmarks