t3/t4

Reply Subscribe

Thread Tools

Search this Thread

08-27-2003, 06:57 PM

79bigbore280zx

Guest

Posts: n/a

t3/t4

can an l28 spool a t3/t4 hybrid?

08-27-2003, 09:59 PM

79bigbore280zx

Guest

Posts: n/a

I WILL PROBABLY MAKE THE ENGINE A 3.1L STROKER BEFORE PUTTING ON THE TURBO IF THAT MAKES A DIFFERENCE IN BEING ABLE TO SPOOL IT

08-27-2003, 11:12 PM

280zx Fever

Guest

Posts: n/a

Easily

Stroker will not make it rev as hard but you will have more mid to low range torque and power

08-28-2003, 09:22 AM

79bigbore280zx

Guest

Posts: n/a

would there be a lot of lag with this big of a turbo, i know grand nationals spool them pretty easily but they are 3.8 and i will be using a 3.1

08-28-2003, 09:22 AM

79bigbore280zx

Guest

Posts: n/a

would there be a lot of lag with this big of a turbo, i know grand nationals spool them pretty easily but they are 3.8 and i will be using a 3.1

08-28-2003, 01:22 PM

Bleach

The Evil Twin

Join Date: Mar 2001

Location: Seattle, WA

Posts: 9,296

I have heard that lots of people use that exact size of turbo for the L28T and they love it. There is a bit more lag, but not lots of lag. The boost levels, however, are tremendously higher. You can't do much with the stock turbo. 12psi so about 240-250hp max with a well worked engine.

08-28-2003, 10:16 PM

IDIOT3

Guest

Posts: n/a

there is alot more to just a t3/t4 turbo. u need to get the right exhuast houings and ar sizes depending on your application.thinking of the 3.1 stroker? so you should have all the little things down? like intercooler, tb and all the other goodies?

08-29-2003, 02:50 AM

280zx Fever

Guest

Posts: n/a

they use t3/t4 hybrids on Mx6's

08-29-2003, 02:53 PM

veyenyl

Registered User

Join Date: Mar 2003

Location: WA

Posts: 373

It's still a t3 turbine wheel. Stock l28et uses a t3. I would say NO lag. That sucker will come on early and come on strong.

09-10-2003, 10:04 AM

#10

Lazerus

Registered User

Join Date: Sep 2003

Location: Houston, TX

Posts: 58

Lag should be virtually non existent, considering that a T3/4 hybrid of some sort is the turbo of choise for most streatable 4 bangers with less than 2L of displacement. And if you spend the extra money for a equal length turbo header and a nice mandrel bent exhaust then you should be just fine.

09-15-2003, 02:22 PM

#11

lifegrddude

Externally Wastegated

Join Date: Oct 2001

Location: San Diego

Posts: 1,220

I'm using a Turbonetics t3/t04b turbo and it runs great. Lag isn't bad at all. Boost starts at about 2300rpms and max boost hits at 2800-3100 depending on what boost level I'm using. Anyway, just thought I'd chime in.
John 82ZXT

Reply Subscribe

Bookmarks