200SX H190 swapable?
10-28-2009 | 02:18 PM
#1
Thread Starter
eff good grammar
Joined: Dec 2007
Posts: 1,578
From: Deadford OR
200SX H190 swapable?
so i came across something interesting.
later NAP-Z type 200SX's have a rear end called H190 and i was wondering if it was swapable with an R200
H190 works the same as R200 aparently but some came with a 5.429 gear set
later NAP-Z type 200SX's have a rear end called H190 and i was wondering if it was swapable with an R200
H190 works the same as R200 aparently but some came with a 5.429 gear set
10-28-2009 | 02:21 PM
#2
The Good Twin
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
later NAP-Z type 200SX's?
Years... we need years...
http://www.geocities.com/inlinestroker/ratio.html
80's 200sx turbo's have R200 diffs.
Years... we need years...
http://www.geocities.com/inlinestroker/ratio.html
80's 200sx turbo's have R200 diffs.
10-28-2009 | 03:42 PM
#3
Thread Starter
eff good grammar
Joined: Dec 2007
Posts: 1,578
From: Deadford OR
ok reading the article i guess mabe not nap-z 200sx's. lemme see what i can find.
It says roadster too so i guess mabe Fairlady era / early 70's
http://www.gordon-glasgow.org/lsdtech.html
so that would make it S10 chasis 200sx
edit:
never mind, H190 is a solid axle:
http://en.wikipedia.org/wiki/Nissan_...ain_variations
guts a possible swap if they work so similarly
It says roadster too so i guess mabe Fairlady era / early 70's
http://www.gordon-glasgow.org/lsdtech.html
so that would make it S10 chasis 200sx
edit:
never mind, H190 is a solid axle:
http://en.wikipedia.org/wiki/Nissan_...ain_variations
guts a possible swap if they work so similarly
Last edited by Niku-Sama; 10-28-2009 at 03:49 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
