chinesekid

hey guys... its been a while, but heres a pic on what i have so far... just one but i'll update more in a bit...

NismoPick

Nice homie! Now you're part of the MSA body kit club!

wreckedj30

y'all suck i need one of them, looks nice, kid.

NismoPick

$560 and it's yours! ( http://www.thezstore.com/page/TZS/PROD/7AP1/50-1512G ) They used to sell each piece individually but I don't know if they do anymore... Looks like they stopped selling the F40 wing...

wreckedj30

hmm,yeah i do believe they sell them seperate, hopefully i can find one at msa for cheap like apollo did....i didn't see your wing so i don't no if i like it or not.

NismoPick

This is the F40 wing.



on my car:

wreckedj30

i know, but i'd need ta see it in person, to see how it flows with the car, looks better on a 2+2 though.

apollo

All you need now is a nice primer job and you'll truely be one of us, kid. Join the ranks . . . .

chinesekid

well.. its only the front air damp... my cousin got it for me so i just put it on for fun... but theres alot of work needed... i dont know what you guys did but, theres like gaps on the side... maybe the body shop fix it or?

snwbrderphat540

primer... ick... lol get some paint ya bums! :P
and im not an F40 wing fan. it belongs on the F40 lol.

NismoPick

haha... I guess you don't have instructions then? Yeah, you have to bleed the bumper shocks to get it to fit around the fender lip.

You are still using the bumper frame right? Take off the bumper frame bar from the shocks & you will see one phillips screw on the inside of each shock flange. Take out the screw & push the shock all the way in & put the screw back in. Now you can adjust where the bumper sits.

Skully

even when you do as nismopick instructed there might still be gaps around the sides where it meets the fender and wheel well ...even when i pushed back the bumper shocks there was gaps on the sides not the front so i had to mould the dam and the rear bumper to make it nice.

like in this pic front and back the sides...

chinesekid

umm bumper shocks? im lost.. pics are helpful.. lol

NismoPick

This is from a 280Z... but same idea. The shock is in the middle (PART# 2.... it should look familiar)

chinesekid

and i had to take the bumper support off to fit in the air damp.. with it on.. it was like a inch or two short... did you guys have to take it off too?

chinesekid

so you left it on... you just moved it aback?!

NismoPick

That's why I said to bleed the shocks....

chinesekid

can you go to zchat nismopick?!? so we can talk.. haha

NismoPick

I wish... I'd be there all day if I could. I'm at work & the Javachat won't connect here.

chinesekid

i cant find any screws on the shocks

chinesekid

i took the bumper support off.. and then put it on w/o it...

NismoPick

If you take that bumper bar off the shocks (remove the 4 nuts on each side of the shock to bumper mount), you should see square flanges on the ends of the shocks. On the side that touches the bumper bar (the undersize of the flange where the sun don't shine) there should be a screw.

NismoPick

So you just have ths shocks sticking out? Look at the square face of the shock flanges & you will see the bleeder screw.

chinesekid

ohhh on the flange itself... yea.. theres a phillp head..

chinesekid

so i just take that off.. and the shocks should push in?