ok heres a preview
04-09-2006, 11:42 PM
#1
Registered User
Thread Starter
Join Date: Feb 2002
Location: Saskatoon, SK
Posts: 2,901
ok heres a preview
ok well here it is. im happy how it all turned out...the airdam looks like there is gap from the hood to it thats because i didnt attatch the bolts behind it but when i do there is no gap...so all in all i like it, i cleaned the garage, ill have to push the car out wash it a few times, i gotta make a new booth in the garage after i mop the floor and ill put plastic sheet on the floor to ....but here it is...oh i also installed my steering wheel..looks BITCHING! ill take a pic tomorrow
Last edited by Skully; 04-09-2006 at 11:44 PM.
04-09-2006, 11:48 PM
#2
Registered User
Join Date: Apr 2006
Location: Concord, NC
Posts: 2,827
Man if you can please take some more pics of the wing, back, top, sides, and under the rear of the wing. I am looking into buying one of those and would like to see more clearly how it looks on the car before I get it. That is going to be one nice looking car.
04-10-2006, 09:05 AM
#9
The Evil Twin
Join Date: Mar 2001
Location: Seattle, WA
Posts: 9,296
black cars are the sweeetnesssss... good colour, nice prep work. Good job on the air dam smoothness. I was actually thinking of doing that with the front turn signals but I'm still unsure. I like it clean.
04-10-2006, 09:12 AM
#10
Super Siver & Black Stud
Join Date: Apr 2003
Location: Hayward Ca
Posts: 1,526
that looks good skully... are you planning on shaving the front side markers.. i see youve already shaved the back ones.... but yeah the car looks good... cant wait to see the next update...
04-10-2006, 04:12 PM
#13
Registered User
Thread Starter
Join Date: Feb 2002
Location: Saskatoon, SK
Posts: 2,901
thanks guys...no sidemarkers are there but i taped it from inside and didnt take the tape off so its same colour as primer and it looks shaved...for the front turn signals i never liked the rectangular ones we had so im thinking of putting some small round ones to offset the headlights somwhere down, not in the bumper where the old ones went but just under them...
04-10-2006, 05:02 PM
#14
Registered User
Thread Starter
Join Date: Feb 2002
Location: Saskatoon, SK
Posts: 2,901
heres more pics...its suppose to be +20 here this weekend...its a 3 day weekend..im thinking of pulling this off and painting it saturday or sunday then...man everything is so dirty in the interior ill have to clean it so bad...oh check out the bling on the rim..i left it original size on purpose!
04-10-2006, 05:19 PM
#15
Registered User
Join Date: Apr 2006
Location: Concord, NC
Posts: 2,827
Those are the pics I was hopeing for, man that looks good. I was hopeing the wing was not wider than the fenders and it looks like it is just right. Where did the wiper arm go? Does it come with a hole for it and you filled it in or did it not come with a hole? Either way cool pics, cool car, cool everything!!
04-10-2006, 06:08 PM
#16
Registered User
Thread Starter
Join Date: Feb 2002
Location: Saskatoon, SK
Posts: 2,901
didint come with one, if you want to keep your wiper then you will have to do some cutting and moulding...i doubt you could just drill a hole trough it as the wiper comes lower then the top panel so you would have to mould it in nice pretty sure....thanks 
04-10-2006, 06:24 PM
#17
Big Poppa
Join Date: Jan 2005
Location: Mission, British Columbia
Posts: 4,499
iceice mentioned to me for my spoiler that if you leave the wiper and mould it, it is a good area for wter to collect. i have the lower profile version of that spolier. all its missing is the lip. hey skully did your spolier come with any mounting studs on the bottom of the hatch (where the hatch lip goes down) mine only has like 6 studs into the main part of the hatch and i dont think its enough, specially if somebody pulls up on it to open the hatch.
04-10-2006, 11:47 PM
#23
Registered User
Thread Starter
Join Date: Feb 2002
Location: Saskatoon, SK
Posts: 2,901
yes metric...
well it feels sloppy but i put anther 3 bolts at the bottom, and i will also put a bead of high strength glue for body panels around the the mounting area of the wing...no way those 6 would hold!...if you dont imagine hitting a bump..that thing would fly off hahah...
well it feels sloppy but i put anther 3 bolts at the bottom, and i will also put a bead of high strength glue for body panels around the the mounting area of the wing...no way those 6 would hold!...if you dont imagine hitting a bump..that thing would fly off hahah...
Last edited by Skully; 04-10-2006 at 11:51 PM.
