ok i swapped maunal window doors for powered ones. does any one have any way to wire the powered ones up? do i have to pull the whole harness for the wired ones from the car? or is there an easier way to do that?

 

they made S130 Manual doors?

 

for the window regulators. i guess i should have been more thourogh.

 

the wiring should be there in the main harness, look around by the kick panels, there are little connectors for the mirrors and windows. if not just swap in the under dash harness, this will require the dash to come out.

 

yeah i hate wiring

 

yo i trade you i want some manuel windows they will go with my lightening up project.

 

where do you live? i already have electric ones and manual ones thats going to go with the car when i junk it

 

idaho man it sucks up here, actually the top of utah. off i-15. do those doors happen to be good?

 

ha no, the doors are in bad shape. the drivers side got hit and dented it at the front seam next to the fender. The right side had that stupid chrome bumper bar stuff on it and was all rusted out from when the previous owner didn't seal it right.

 

oh right right, well tell me how to do it, and when i have time i'll get at it. Probably this weekend maybe sooner. What all do you need? and what do i need, to swap the manuels in.

 

i don't need anything other than to wire up the doors and mirrors. But all you need is the manual window assembly inside the door its self. The glass is the same. So all you have to do is take out your electric regulators and swap in the manual ones. Its a PTA to get the glass undone from the arm assembly. If you have a hynes manual or a chiltons that will help alot. You can prob find an assembly at a junk yard. I have not found that many electric ones around here.

 

yeah there are no, i repeat no z's up here, every one thinks it a vette', i just laugh and tell them i'd never drive a chevy.how soon do you want them, cause i can get to work right after school. so swap or what, do you happen to have a manuel rack n pinion on your extra 79?

 

so no power steering? yeah thats what i have on my driver i don't want power. My parts one has power.

 

sorry for taking so long damn computer sucks *****. Thats cool im trying to get as light as possible, so i was just asking. I can get out the harness, in the next couple days, if you want to trade its a deal, cause i can't find anything around. i need to fix my running lights and its all yours.

 

i have everything i need for mine. ill try to get the regulators out this weekend to send ya.

 

Ok i tried to wire the doors and yeah I hate wiring!!! So any one have any ideas on how much it would cost to have a shop wire the windows and mirrors?

 

$60 to $90/hr depending on your area.

 

ouch hmmmm ok i'll start searching