280ZX (S130) Forums Dedicated to 79-83 ZCars

Weatherstrip

Thread Tools
 
Search this Thread
 
Old 07-23-2012 | 06:50 AM
  #1  
Marlon's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 12
From: Palmdale, Ca.
Weatherstrip

I need to replace the weatherstrip on my 82 280zx, how much am I looking at? And who does that kind of work (e.g. Body shop, window place, etc.)?

Thanks for any help anyone can provide...
Marlon
Old 07-23-2012 | 07:54 AM
  #2  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Weatherstrip like the chrome trim or the rubber window seals? You can get trim from the same place you get all Z parts: Nissan, MSA, BDA, etc (we have a huge "WHERE TO GET PARTS" list in the Gen Tech area).

And you can install all trim and weatherstripping yourself with a set of screwdrivers and urethane sealer.
Old 07-28-2012 | 12:50 PM
  #3  
Marlon's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 12
From: Palmdale, Ca.
I'M talking about the rubber seals, I'll look into the "where to get parts"and see what I can find, thanks...
Old 07-30-2012 | 07:09 PM
  #4  
rusty97's Avatar
Registered User
 
Joined: Dec 2010
Posts: 55
the rubber seal

It has been 5 months that i have strickly been looking for the rubber glass seal for the rear and is completly impossible to find. my car is at the body shop fully painted finaly but no one from here to china has this rubber seal i have found it for the 1980-83 2+2 (idk if this will fit they said no on the phone) and i found it for the 78 but i cant find it for the coupe. Does anyone know if the 2+2 glass is the same as the coupe if it is i know i place that sells it. other than that is impossible to find. The glass guy says he can seal it with just glass sealer and im sure it wont leak but will in time just come off cuz hell is just a sealer idk! good luck finding it if you do hit me up i need it too
Old 07-31-2012 | 09:11 AM
  #5  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
2seater & 2+2 hatch glass are different sizes.

Your local Nissan dealer can't source one for you?
Old 07-31-2012 | 09:48 AM
  #6  
icice9's Avatar
Super Siver & Black Stud
 
Joined: Apr 2003
Posts: 1,526
From: Hayward Ca
did you try this place?
Weatherstrip, 79-83
Old 07-31-2012 | 09:52 AM
  #7  
icice9's Avatar
Super Siver & Black Stud
 
Joined: Apr 2003
Posts: 1,526
From: Hayward Ca
google is your friend..
datsun 280zx parts rubber
Old 07-31-2012 | 10:33 AM
  #8  
rusty97's Avatar
Registered User
 
Joined: Dec 2010
Posts: 55
yup

i have spoken to my dealer many times they say they cant even outsource it. and i have been writing emails between Zcar source they said that hatchaback they have on site is for the 2+2 only (New Nissan 280ZX Hatch Glass Weatherstrip for the 1979-83 Datsun/Nissan 280ZX 2+2.) kind of missleading they put hatch glass in there lol. same for that other store. i have written emails to every source i could find. nothing.
Old 07-31-2012 | 08:55 PM
  #9  
FricFrac's Avatar
Mr Z++ Wiki
 
Joined: Sep 2009
Posts: 2,195
From: Victoria, BC
Originally Posted by icice9
did you try this place?
Weatherstrip, 79-83
Ouch my bum hurts...

Datsun Nissan 280zx Door Glass Weatherstrip

Datsun Nissan 280zx Door Glass Weatherstrip
Old 07-31-2012 | 09:28 PM
  #10  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
^^^ That would be the next great 280zx re-invention... someone making a t-top weather stripping kit.
Old 07-31-2012 | 10:37 PM
  #11  
rusty97's Avatar
Registered User
 
Joined: Dec 2010
Posts: 55
yup

lol. that would be nice.
And yes i have spoken to that company on phone and no. some dude today from i forgot what company said they might have it shipped from japan he will get back to me. we'll see!
Old 08-05-2012 | 08:55 PM
  #12  
Marlon's Avatar
Thread Starter
Registered User
 
Joined: Jan 2009
Posts: 12
From: Palmdale, Ca.
Isn't there a universal kit out there that we can use?
Old 08-05-2012 | 09:32 PM
  #13  
koprutzxt's Avatar
Registered User
 
Joined: Apr 2012
Posts: 127
i talked to thad ziegler glass once here in SAn antonio about my hatch glass and they said if ur weather strip is no good we can just use the half of the strip on the inside and urathane it to the hatch and seal the outside, and make it look clean.. for like 129. and i believe i was just talking to a front desk lady who happen to know that lol.. id imagine its extra if u want them to use new strip
maybe its a common practice
its an option ....
Old 08-05-2012 | 09:40 PM
  #14  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
^^^ Take a close look at your hatch glass gasket... The glass is literally pressure fitted into the gasket & hatch. When I was doing body work on my car, I was able to get the glass out, but could not get it back in, so I had a glass shop reinstall it for me. I sat there and watched him and he even had a fun time. You absolutely do not want to "urethane" in the hatch glass... unless you want it to fall in on you and shatter all over the interior.
Old 08-05-2012 | 10:04 PM
  #15  
koprutzxt's Avatar
Registered User
 
Joined: Apr 2012
Posts: 127
idk about all that but .some foos from the junk yard came out to my house and i had them replace both hatck glass in my z's just cuz i wanted the rear glass defogger and one with louver mounts. they used some string and a screw driver even ripped one of the seals 3 yrs later glass is in there and no leaks. 2o bucks a pop
and i bought a 280zxt once with the hatch glass not even fully installed it was kept on by blue tape never fell in or flew off all the way home from houston and a few days after that..
idk what keeps em in or how to install and dont care ima motor man not a body artist but consider all possoblilities
Old 08-05-2012 | 10:16 PM
  #16  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Blue tape what the installers put on it once installed (ever had a windshield done?). I doubt it's just blue masking tape that's holding the glass to the car...
Old 08-06-2012 | 09:22 AM
  #17  
koprutzxt's Avatar
Registered User
 
Joined: Apr 2012
Posts: 127
i have had that glass installed more time than i care to admit .. when i first delt with z's i blew out two rear hatch glass trying to change louver mounts my self from one of my z to the other.. an nope. i know what the blue tape is for and i can tell u now, when i pulled it off there was definately no instalation done lol.. it was just sitting on top taped to the hatch..
Old 08-06-2012 | 02:27 PM
  #18  
rusty97's Avatar
Registered User
 
Joined: Dec 2010
Posts: 55
Well for my car when we stripped down the rear hatch we found out that who ever had the car before me had cut the rubber seal around the glass in half and then home made glued it back with silicone etc. SO i cant really put the old seal back on its cut exactly in half all around. This is why im in need to find another one. that dude that said that might get it for me from japan is still looking. bla!
Old 08-06-2012 | 02:38 PM
  #19  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Have you tried to source another 2seater hatch from a junk yard? I think there is a coupe in my local Pick N Pull... Maybe I'll stop by this week and check for ya (give the window a good smasheroo and take the seal if no one has yet).
Old 08-06-2012 | 02:45 PM
  #20  
rusty97's Avatar
Registered User
 
Joined: Dec 2010
Posts: 55
I have been to every junk yard here but as i found out miami florida has 0 of these cars i bought this car in a junk yard back when i lived in california a year ago and saw a million of these so it was easy to get parts. down here this car is soooo rare. if you find the seal in ok condition i would soo pay you for it and your time and effort. i have been months on this dang seal. the glass guy wants to just glue it with that puddy they use and im like NO. yeah it wont leak but first time i take it in the express way i bet you it will fly off and kill everyone behind me lol.
Old 08-07-2012 | 06:35 PM
  #21  
rusty97's Avatar
Registered User
 
Joined: Dec 2010
Posts: 55
just got the word all the way from JAPAN

i can get almost every part of the engine but not 1 rubber seal lol this what Zpeeps had to say about the seal

"Just got the word from our contact in Japan (NO LONGER AVAILABLE)due to the small demand."

seriously!
Old 08-22-2012 | 11:03 PM
  #22  
Spike 117's Avatar
Registered User
 
Joined: Aug 2012
Posts: 8
If only someone in the Z community could get their hands on one of the molds for this, and make them.
Old 08-24-2012 | 03:19 PM
  #23  
FricFrac's Avatar
Mr Z++ Wiki
 
Joined: Sep 2009
Posts: 2,195
From: Victoria, BC
I just checked because sometimes we can get stuff in Canada that is NLA in the USA, etc. Nadda on the weather strip for the rear hatch. It's the begining of what happens with all Datsuns... stuff starts to become unavailable. We're lucky there are so many parts cars around..... for now....

Did you find a used one you can use?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmw_man
280ZX (S130) Forums
8
10-26-2013 07:06 PM
moparmusclecars
240Z, 260Z, 280Z Appearance Exterior, Interior
0
12-24-2011 06:49 AM
ynotmedic
300ZX (Z31) Forums
1
03-27-2010 08:08 PM
dhp123166
FS: 240Z,260Z,280Z & 280ZX (70-83)
2
08-17-2009 08:53 AM
zfreak1981
Wanted (WTB / WTT)
2
04-04-2009 05:05 PM




All times are GMT -7. The time now is 05:37 AM.