Hi Guys

I have an 86 na and I installed Eibach Pro Kit springs. Come this May I will install Bilstein HD shock all around. Since the pro kit springs lowered my Z 1.5 inches or more, do I need camber plates? Currently, the top dish that holds the front coil springs in place is binding/rubbing with the inside of the strut tower. It only binds/rubs when I turn the wheel all the way over. I usually notice it at very slow speeds say 5 mph or in parking lots. This was a problem I didn't have before I changed the springs. It even binds/rubs when the car is up on jack stands.

I would greatly appreciate any and all suggestions or help.