300ZX (Z31) Forums Dedicated to 84-89 ZCars otherwize known as the Z31's

Why won't it start?

Thread Tools
 
Search this Thread
 
Old 01-24-2010 | 03:04 PM
  #1  
him fast's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 9
Why won't it start?

I just purchased an 86 n/a 2+2. It's ben sitting so I started going thru it. I've driven it around the neighborhood quite a bit. I knew it needed a battery' so one day I came back from a neighborhood cruise & shut it off. I went to start it & all the lights dimmed like it wanted to start but it didn"t say a word. I went & got a new battery, still the same thing. Its a little cold to be messing around with it right now, but where should I start?
Old 01-24-2010 | 03:36 PM
  #2  
bojo68's Avatar
Registered User
 
Joined: Jul 2009
Posts: 341
Originally Posted by him fast
I just purchased an 86 n/a 2+2. It's ben sitting so I started going thru it. I've driven it around the neighborhood quite a bit. I knew it needed a battery' so one day I came back from a neighborhood cruise & shut it off. I went to start it & all the lights dimmed like it wanted to start but it didn"t say a word. I went & got a new battery, still the same thing. Its a little cold to be messing around with it right now, but where should I start?
Check all your connections, battery post, clamp to cable if you have cheap cables, starter, fusible links. My bet is you'll find it without going much further.
Old 01-24-2010 | 06:52 PM
  #3  
him fast's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 9
thanx. I'll give those a try.
Old 03-29-2010 | 07:46 PM
  #4  
him fast's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 9
Ok I tried a new battery. Clamped it tight. Idk where the fusable link is. I think it is either a bad ground or there is a relay under the hood that says security/starter. could that be it? HELP!
Old 03-29-2010 | 09:31 PM
  #5  
vitaminZ's Avatar
Registered User
 
Joined: Mar 2010
Posts: 68
From: Toronto, Canada
IT could be your alternator?

did the car start when you put the new batt in?
Old 04-16-2010 | 08:50 PM
  #6  
him fast's Avatar
Thread Starter
Registered User
 
Joined: Jan 2010
Posts: 9
Nope it does the same thing. All the lights come on, But it's like no power is going to the starter. I think ill try to jump it from underneath.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
zcooks
280ZX (S130) Forums
12
04-11-2016 06:36 AM
bongpogi
280ZX Performance / Technical
3
08-19-2015 11:15 AM
moorebl
280ZX (S130) Forums
2
04-14-2011 03:28 PM
bardabe
300ZX (Z32) Forums
22
09-21-2004 03:12 PM



Quick Reply: Why won't it start?



All times are GMT -7. The time now is 09:25 PM.