is treadstone performance a good intercooler setup
#1
is treadstone performance a good intercooler setup
is treadstone performance a good intercooler setup
bm8 intercooler ... ~1psi drop 2.5 in/out ... 2.5 stainless steel piping and silcone couplers with t-bolt clamps good upto 510hp all for about $420 the pic shows worm gear but you can get t-bolt for a little more
bm8 intercooler ... ~1psi drop 2.5 in/out ... 2.5 stainless steel piping and silcone couplers with t-bolt clamps good upto 510hp all for about $420 the pic shows worm gear but you can get t-bolt for a little more
#3
well no it's not a z31 kit the intercooler is $199 and the piping kit is $229 ... but here's the measurements
Core Size, 7.8" X 22" X 3.5"
Overall lenght 28"
2.5" inlet/outlet
760 CFM flow rate
will it fit? ... they have a smaller one.
Core Size, 7.8" X 22" X 3.5"
Overall lenght 28"
2.5" inlet/outlet
760 CFM flow rate
will it fit? ... they have a smaller one.
#10
do you know of any pictures of the hks setup ... I live in dallas texas, and I don't know if I could live with out A/C, t-tops are nice and all but a month of 110 is no fun for somebody who is originally from chicago
#12
Originally Posted by Turbo86
do you know of any pictures of the hks setup ... I live in dallas texas, and I don't know if I could live with out A/C, t-tops are nice and all but a month of 110 is no fun for somebody who is originally from chicago
Jim Wolf Technology actually has a PDF file with the complete layout.
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
1986, 300z, air, conditioner, conditioning, dimensions, factory, fits, good, hks, intercooler, piping, size, treadstone, z31