300ZX (Z31) Performance / Technical Discussions related to Turbo charging, Supercharging, Engine, ECU, exhaust, and etc. performance enhancements and Techical related.

Will clutch fit?

Thread Tools
 
Search this Thread
 
Old 10-09-2005 | 04:05 PM
  #2  
craZed's Avatar
Registered User
 
Joined: Dec 2003
Posts: 102
From: riverveiw,fl
Ok, the 87 thru 89 turbos have a 250mm clutch .
The 84 thru86 have a 240mm clutch.
Which clutch do you have?
A 240mm is what you need.It is the only one that will fit your flywheel.
Any transmision is compatable with the 240mm clutch kit.

Last edited by craZed; 10-09-2005 at 04:07 PM.
Old 10-09-2005 | 04:11 PM
  #3  
craZed's Avatar
Registered User
 
Joined: Dec 2003
Posts: 102
From: riverveiw,fl
If you have a 250mm clutch kit you will need a 87-89 turbo flywheel to make it work.Then you will have to do some grinding inside of your bell housing to make the pressure plate clear.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LikeZcars
280ZX Performance / Technical
6
02-24-2013 07:41 PM
decalservice
240Z, 260Z, 280Z (S30) Forums
5
08-26-2012 01:16 AM
JSimpson
FS: 300ZX (90-96)
0
07-25-2011 11:59 PM
Fast240Z
240Z, 260Z, 280Z (S30) Forums
2
06-22-2005 09:59 AM
jtmny1999
280ZX Performance / Technical
0
01-18-2004 10:04 PM




All times are GMT -7. The time now is 10:26 PM.