i was wondering if anybody has bose speaker adapters for a 91 tt. or if u know where i can get them. please let me know. thanx.

 

No adapters. Cut the 2 larger wires that send power to the amp and install aftermarket 6 1/2's over the bose enclosures. Then seal it with something. Blose stuff is a pain in the but. Gutt the whole blose system.

 

Could you explain what you mean by speaker adapters? I just replaced the the BOSE system in my 90 NA. I reused all the speaker wiring and just taped off the power leads to each speaker. I bought the new speaker brackets from Courtesy. Costly but painless. I fitted 4x6" Kenwoods in the rear and 6.5" Kenwoods in the front using the brackets. I just took apart the Bose enclosures snipped the wiring to the AMPs and used them to couple to the new speakers. You will only need some wirenuts or crimps to do the job. My headunit is in route via EBAY (fingers crossed). I am told that the NN02B harness adapter will mate up the existing BOSE harness behind the RADIO so I ordered that and a antenna adapter to mate the two prong lead to one that is standard on normal headunits. I will resell the BOSE speakers and enclosures on EBAY. PM me if you have more questions.
cd

 

I just did 2 Custom install on 94 zx and have made my own custom speaker plates using the bose enclosure and factory wiring. I installed 6 1/2 sep in all four locations (doors & rear) I'm actually thinking of selling this design on ebay. Let me know if you are interested

VSM NJ300ZX10

 

i would be interested

 

Contact me at samsales@comcast.net and i'll send you a few pics

VSM NJ300ZX10