300ZX (Z32) Performance / Technical Discussions related to Turbo charging, Supercharging, Engine, ECU, exhaust, and etc. performance enhancements and Techical related.

1993 valve knock

Thread Tools
 
Search this Thread
 
Old 05-01-2009 | 06:16 PM
  #1  
nismo619's Avatar
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 1,271
From: z junk yard
1993 valve knock

Well i have been useing royal purple motor oil 5w30 for over a month now and just a few days ago i notice a tapping sound from the top of the engine. The car is fine when cold. But once warmed up u can hear the tap at 1,500 rpm only. sigh...

any idea's ?

valve job ? stainless ferreaa vavles ?

what do you 1990-1996 300zx-z32 guys an gurls think ?
Old 05-01-2009 | 06:20 PM
  #2  
NismoPick's Avatar
The Good Twin
 
Joined: Aug 2005
Posts: 20,639
From: Wild Wild West, UTAH!
Post a video....
Old 05-01-2009 | 06:40 PM
  #3  
ZLover4Life's Avatar
Encyclopedic Knowledge
 
Joined: Aug 2005
Posts: 3,316
From: Naperville, IL
Search n00b. I've covered how to remedy lifter tick, and it sounds like all you have is an air bubble.
Old 05-01-2009 | 07:34 PM
  #4  
KasbeKZ's Avatar
Pr0n Addict
 
Joined: Sep 2007
Posts: 4,617
From: virginia
https://www.zdriver.com/forums/showt...er+tick+remedy

woot.
Old 05-01-2009 | 07:50 PM
  #5  
nismo619's Avatar
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 1,271
From: z junk yard
I haVE changed the oil. 5w30 royalpurple and i used oil stabalizer . I use only k&n oil filter only since i bought the car. I even put in lucas fuel treatment. i only use 92 octane. argh !
Old 05-01-2009 | 10:02 PM
  #6  
b300z's Avatar
caught the z fever
 
Joined: Jun 2004
Posts: 2,518
From: Lafayette, IN
royal purple is your problem. replace it with mobil 1
Old 05-01-2009 | 11:26 PM
  #7  
Sweets's Avatar
Usedta be Justin260z
 
Joined: Jan 2007
Posts: 722
From: Oklahoma City
But the Royal Purple, she has Synerlec!!
Old 05-01-2009 | 11:44 PM
  #8  
ZLover4Life's Avatar
Encyclopedic Knowledge
 
Joined: Aug 2005
Posts: 3,316
From: Naperville, IL
wow, that's totally not the remedy I was referring to (forgot all about that post LOL). In more recent posts, I recommend hopping on the highway, shoving it into third, and doing a couple WOT pulls to get the oil pressure up, thus forcing out air bubbles. If that doesn't do it, we'll try something more evasive.

Last edited by ZLover4Life; 05-01-2009 at 11:55 PM.
Old 05-01-2009 | 11:49 PM
  #9  
napoleonzheking's Avatar
F5 Hero
 
Joined: Aug 2005
Posts: 855
From: Little Rock, Arkansas
Originally Posted by ZLover4Life
couple WOT pulls to get the oil pressure up,
WOT pull??
Old 05-02-2009 | 01:24 AM
  #10  
KasbeKZ's Avatar
Pr0n Addict
 
Joined: Sep 2007
Posts: 4,617
From: virginia
wide open throttle.
Old 05-03-2009 | 12:16 PM
  #11  
nismo619's Avatar
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 1,271
From: z junk yard
OK i will take it to a texas high way to go WOT. 75 mph?
Old 05-03-2009 | 12:30 PM
  #12  
ZLover4Life's Avatar
Encyclopedic Knowledge
 
Joined: Aug 2005
Posts: 3,316
From: Naperville, IL
Just do enough to get the oil pressure up... obviously be careful with the speed you use. The goal is just to force out any air bubbles that may be there.
Old 05-05-2009 | 10:27 PM
  #13  
nismo619's Avatar
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 1,271
From: z junk yard
ok i did that today and guess what ? i think it got worse...could the timing belt of sliped a tooth ? and thats why when the car is fully warmed up that it has a loud valve knock ?
I never had this problem before im disconecting the car battery tonight and tomorow when i drive my car hopefully it was a simle ecu malfunction . If not im gonna make my gurlfriend pay to get new vavles and performance cams etc. lol
Old 05-05-2009 | 10:44 PM
  #14  
KasbeKZ's Avatar
Pr0n Addict
 
Joined: Sep 2007
Posts: 4,617
From: virginia
not sure what ECU malfuction will cause knocking...

if the timing belt was off, it wouldn't just be knocking, it would be running pretty badly too.
Old 05-05-2009 | 10:55 PM
  #15  
ZLover4Life's Avatar
Encyclopedic Knowledge
 
Joined: Aug 2005
Posts: 3,316
From: Naperville, IL
It is not likely that the timing belt would jump a tooth, but it is possible.

I'm almost willing to bet it's not the valves, but rather rod knock. Beginning rod knock is most prominent at a constant RPM.
Old 05-05-2009 | 11:08 PM
  #16  
nismo619's Avatar
Thread Starter
Registered User
 
Joined: Sep 2005
Posts: 1,271
From: z junk yard
the knock is at 1,500 rpms' only though ? but its not noticeable when the car is cold. But when the car is warm you can really hear it. MAYBE its a sticky vavle im gonna run the car until gas is low and im gonna try some serious octan booters " NOS " off road.

The noise is located on the passenger side rear top of the engine
Old 05-05-2009 | 11:09 PM
  #17  
napoleonzheking's Avatar
F5 Hero
 
Joined: Aug 2005
Posts: 855
From: Little Rock, Arkansas
my timing belt jumped 5 teeth.... after the tensioner failed... it is possible... you will hear the timing belt flopping around under the cover if the tensioner has failed.
Old 12-01-2011 | 07:11 PM
  #18  
caseythesnake's Avatar
Registered User
 
Joined: Nov 2011
Posts: 4
this happene to me last week

Originally Posted by napoleonzheking
my timing belt jumped 5 teeth.... after the tensioner failed... it is possible... you will hear the timing belt flopping around under the cover if the tensioner has failed.
did u bend anything or ruin anything ??
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Devonz32
300ZX (Z32) Performance / Technical
3
04-12-2015 08:43 PM
tsefreeflow
300ZX (Z32) Performance / Technical
3
09-21-2003 03:29 AM
haktmal
280ZX Performance / Technical
3
04-20-2003 07:59 PM
tsefreeflow
300ZX (Z32) Performance / Technical
6
10-28-2002 05:24 PM




All times are GMT -7. The time now is 08:31 PM.