Which is the best consult 1 replacement????
06-03-2005, 08:22 PM
#27
Registered User
Thread Starter
Join Date: May 2005
Location: Auckland New Zealand
Posts: 14
Originally Posted by b300z
this program get better and better every time i look at it
why is the o2 sensor reading going crazy
why is the o2 sensor reading going crazy
If you look below the o2 sensor guage you'll see the Air fuel ratio changing just as quickly (red - green, red - green). As the o2 sensor is sensing the changes the ECU is adjusting the A/F to suit. Apparently if this is not happening quickly it is a sign that their may be a problem with the o2 sensor/s.
Well that's my understanding, if you need more I'll get Jason to explain it in more detail or from a technical perspective.
Thanks for the feed back.
06-06-2005, 04:54 PM
#29
Registered User
Thread Starter
Join Date: May 2005
Location: Auckland New Zealand
Posts: 14
Help,,
I'm not sure who to ask and if it's OK but here goes.....
Jason from BlaZT.biz contacted me yesterday. As he is busy with manufacturing and development of the Interface cable and other products, he's also quite happy I know what I'm doing and can help his clients and also deal with the computer stuff.
So he has asked me to help him promote the cable over the net.
Now the problem,
1. Am I allowed to promote the cable and software on here?
2. What are the rules, if any?
3. Where can I post etc?
I'm quite happy to answer Questions and if it's beyond me I'll get Jason to helpout with the answer.
He has also offered a $5-00 discount on any order that mentions my name or handle.
I am very happy with the cable and software, what it is going to help me do and it's ease of use.
Looking forward to hearing back from you
I'm not sure who to ask and if it's OK but here goes.....
Jason from BlaZT.biz contacted me yesterday. As he is busy with manufacturing and development of the Interface cable and other products, he's also quite happy I know what I'm doing and can help his clients and also deal with the computer stuff.
So he has asked me to help him promote the cable over the net.
Now the problem,
1. Am I allowed to promote the cable and software on here?
2. What are the rules, if any?
3. Where can I post etc?
I'm quite happy to answer Questions and if it's beyond me I'll get Jason to helpout with the answer.
He has also offered a $5-00 discount on any order that mentions my name or handle.
I am very happy with the cable and software, what it is going to help me do and it's ease of use.
Looking forward to hearing back from you
07-06-2005, 08:24 AM
#41
Bad Speller
Join Date: Sep 2004
Location: Moreno Valley, CA
Posts: 1,832
Originally Posted by topless93
If you don't mind me asking, where do you get your power inverter for your laptop, great idea.
LATER
LATER
07-07-2005, 09:41 PM
#43
Registered User
Join Date: May 2005
Location: Murrieta California
Posts: 4
blaZt.
I also am pleased with the blaZt product. I need instructions to be able to run this fully. I do not understand how to read the mapping and other parts of the program.
Jason has been very helpful. They will come out with an instruction manuel in the
near future. Also new updates. I am having fun trying to teach myself how to use this. I hope they come out with a new version that will help me locate the problem with my cruse control. Hope everyone gets the best out of the blaZt.
Jason has been very helpful. They will come out with an instruction manuel in the
near future. Also new updates. I am having fun trying to teach myself how to use this. I hope they come out with a new version that will help me locate the problem with my cruse control. Hope everyone gets the best out of the blaZt.
Last edited by goofylouis; 07-07-2005 at 09:57 PM.
07-08-2005, 08:58 PM
#45
Registered User
Join Date: May 2005
Location: Murrieta California
Posts: 4
My Cruse will not engage. The light comes on when I turn it on but will not work. I have checked all of the electrical tests under the hood and under the floor board. I followed directions from my Service Manual. I have a 1993 300ZX 2+2 Non Turbo. I have a great car and am trying to make everything work .
I thank you for your interest and hope you might have a suggestion. I am ready to take it to the dealer for trouble shooting.
Thank you,
Paul
I thank you for your interest and hope you might have a suggestion. I am ready to take it to the dealer for trouble shooting.
Thank you,
Paul
07-08-2005, 09:29 PM
#46
caught the z fever
Join Date: Jun 2004
Location: Lafayette, IN
Posts: 2,518
is it a manual?
if it is...have you ever adjusted the clutch petal? or if the person before you did, the cruise control solenoid might not be closed all the way because it was unscrewed too far
if it is...have you ever adjusted the clutch petal? or if the person before you did, the cruise control solenoid might not be closed all the way because it was unscrewed too far
07-09-2005, 01:45 PM
#47
Registered User
Join Date: May 2005
Location: Murrieta California
Posts: 4
Yes, I bought a 1993 service manual from Nissan. Not Cheep. I will take a look at the Clutch petal to see if it is closed or open. I have looked at this but thought it was closing when the petal is all the way back. Thank You. I will let you know.
Last edited by goofylouis; 07-14-2005 at 04:14 PM.
07-18-2005, 05:37 AM
#48
Registered User
Thread Starter
Join Date: May 2005
Location: Auckland New Zealand
Posts: 14
Hi guy's Charles here,
Just letting you know that Jason from Blazt.biz has just completed his USB interface cable for the 300ZX and other Nissan cars.
He has managed to get the electronics into the USB plug. Very tidy.
This has been specifically for those with no Serial port on their laptop.
It cost's a bit more but still cheaper than buying the cable and serial/usb adaptor,
and remember he will still give the $5-00 Discount dont forget mention my name or my log in name chas300tt .
He has also revamped the website, so have a look & tell us what you think.
http://www.blazt.biz
Just letting you know that Jason from Blazt.biz has just completed his USB interface cable for the 300ZX and other Nissan cars.
He has managed to get the electronics into the USB plug. Very tidy.
This has been specifically for those with no Serial port on their laptop.
It cost's a bit more but still cheaper than buying the cable and serial/usb adaptor,
and remember he will still give the $5-00 Discount dont forget mention my name or my log in name chas300tt .
He has also revamped the website, so have a look & tell us what you think.
http://www.blazt.biz
07-18-2005, 10:49 PM
#50
Registered User
Join Date: May 2005
Location: Murrieta California
Posts: 4
Hey b300z
I got sidetracked and have not checked the switch on my clutch. I had to fix my cracked fan. I ordered a fan and will have my car running soon. I still plan to let you know what I find. If this checks out I plan to take out the speedometer Gear and check it. I have a M/T
Sorry to have taken your question about manual wrong. Anyway I will check this out this weekend.
Thank you for your suggestions.
I got sidetracked and have not checked the switch on my clutch. I had to fix my cracked fan. I ordered a fan and will have my car running soon. I still plan to let you know what I find. If this checks out I plan to take out the speedometer Gear and check it. I have a M/T
Sorry to have taken your question about manual wrong. Anyway I will check this out this weekend.
Thank you for your suggestions.
