iacv ?
12-04-2005, 03:51 PM
#1
Registered User
Thread Starter
Join Date: Nov 2005
Location: Atlanta
Posts: 15
iacv ?
i kinda tried to search and found how to clean it remove it yada yada but diagnosis seems to be guessing its bad and replacing/cleaning it
well
i figure its the source of my problem - it seems to be ok via the multimeter test - its not horrible dirty and i cleaned the terminals - however when i plug the plug in it idles at 2k when i unplug it it idles at 1k so i am guessing it is bad or is this somethign else that i am missing?
how bad is it to just leave it unplugged?
when i turn on the ac the rpms still rise which i thought was the things purpose - so i am confused?
well
i figure its the source of my problem - it seems to be ok via the multimeter test - its not horrible dirty and i cleaned the terminals - however when i plug the plug in it idles at 2k when i unplug it it idles at 1k so i am guessing it is bad or is this somethign else that i am missing?
how bad is it to just leave it unplugged?
when i turn on the ac the rpms still rise which i thought was the things purpose - so i am confused?
12-04-2005, 05:21 PM
#2
Jack Of All Trades
Join Date: Jun 2004
Location: Acton, California
Posts: 2,296
All of the diagnostic procedures are here: DIAGNOSTIC PROCEDURES
I believe Page #156 will have the specific procedure for the IACV.
Rizzzzzzzz'sssssss link page has the FSM and many more good bits of info.
I believe Page #156 will have the specific procedure for the IACV.
Rizzzzzzzz'sssssss link page has the FSM and many more good bits of info.
Thread
Thread Starter
Forum
Replies
Last Post
Bookmarks
